Canon imageRunner 2220i User Manual page 95

5
1
1-74 Searching a Destination via a Server (Search on Server)
Press [Start Searching].
To cancel searching, press [Cancel].
To cancel searching while the machine is searching for your criteria, press
[Cancel]. If the machine finds some results before you press [Cancel], these
search results are displayed.
The search results are displayed.
IMPORTANT
The number of search results displayed will not exceed the maximum limit set in
Register LDAP Server in System Settings (from the Additional Functions screen). If
the desired destination is not displayed, either increase the maximum number of
addresses to search or change the search criteria. (See Chapter 4, "Selecting and
Storing Settings," in the Reference Guide.)
NOTE
If you press [Start Searching] without specifying any search criteria, all the
addresses stored on the LDAP server are displayed.