Q
46
I have just sent an important document via facsimile .
Can I check to make sure that it was sent correctly?
A
You can check the send job status from the Status Monitor/Cancel screen or
check that the sent transmission was completed using the Job Done Notice
mode .
●
To check from the Status Monitor/Cancel screen:
Press
[Log] → check that the sent job is listed.
●
To receive send result via e-mail:
Press [Fax] → [Options] → [Job Done Notice] → specify
the e-mail address where you want to receive the
result.
•
If the Fax TX Report is set, you can output and check the Fax TX Report every time. Also, if the Fax Activity Report is
set, you can output and check Fax Report from the past. For more information, see e-Manual > Settings/Registration.
(Status Monitor/Cancel) → [Send] →
0
0