Canon imageRunner 2220i User Manual page 396

Tone
Some data services may require that you use tone dialing. If you have a pulse dial
telephone, press the Tone key to switch temporarily from pulse to tone dialing when
connecting to these data services.
Transfer
You can arrange for all documents received on the main fax unit to be transferred to
another fax unit. For example, you can have your office fax transfer all incoming
documents to your home. You can specify the day of the week and time of the day at
which this feature is activated. However, documents received into a Mail Box or
Confidential Mail Box cannot be transferred.
Transmission Time
A fax transmission consists of three stages: the machine sending the fax connects
with the machine receiving it, the message is then transmitted, after which the sender
and the receiver exchange signals to confirm the end of transmission. The
transmission time described in this guide is not the total time required for the entire
transmission, but only the time taken for the message transmission.
TTI
Transmit Terminal Identification. Also called the TX Terminal ID. The TTI is the name of
a person or an organization and the facsimile number of the machine that sends a
document. In addition to a unit name that you register for the machine, you can create
up to 99 sender names that can be selected and used in place of the unit name when
you send a facsimile transmission.
TX
Abbreviation of "Transmission/Sending."Type of Telephone Line Depending on the
type of phone line that you have, set the machine to touch tone (T) or pulse (P)
dialing.
Type of Telephone Line
Depending on the type of phone line that you have, set the machine to touch tone (T)
or pulse (P) dialing.
U
Ultra Fine
A resolution mode for sending originals at 16 dots/mm x 15.4 lines/mm (eight times
the standard resolution). If the receiving fax does not support this mode, the original is
automatically sent in the Superfine or Fine mode.
6
Glossary 6-9