2
1
3
4
1-148
Configuring Send Settings (Send Settings)
Press [Send Settings] © [Stamp].
NOTE
To cancel the Stamp mode, press [Stamp] again.
Press [Done].
The display returns to the Send screen.
Press
(Start)
The machine starts scanning.
A < > mark (stamp) appears on the output original.
NOTE
•
If the stamp is not marked clearly, see Chapter 7, "Optional Equipment," in the
Reference Guide.
•
If the Preview is set to 'On', you can preview the images of documents before
sending. (See "Previewing Originals (Preview)," on p. 1-178.)