Canon imageRunner 2220i User Manual page 224

IMPORTANT
Even if Erase Failed TX is set to 'Off', the documents sent with Direct Sending for
fax or the ones sent from the fax driver do not remain in memory if the transmission
ends in an error.
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
3
Select [On] or [Off] © press [OK].
[On]: Erases jobs after sending, whether transmission ends normally or with an
error.
[Off]: Stores a job in memory if transmission ends in an error.
The specified mode is set.
4
Press [Done] repeatedly until the Send Basic Features screen
appears.
Setting Automatic Document Deletion (Erase Failed TX)
3
3-5