Canon imageRunner 2220i User Manual page 62

[PIN Code]: Press to enter the PIN Code. (See "Dialing With a PIN Code," on p.
1-186.)
[Direct]: Press to send documents directly to the recipient. If you do not select
Direct Sending, Memory Sending is used. (See "Sending a Job to a Fax," on p.
1-149.)
[Next]: Press to specify another destination after specifying the first destination
using the numeric keys.
[Sub-address]: Press to enter an optional subaddress or password.
[On-hook]: Press to use tone dialing. (See "Using Fax Information Services," on
p. 2-8.)
To delete the number you entered, press
IMPORTANT
Pauses cannot be entered before telephone numbers.
NOTE
•
The telephone number can have up to 120 digits.
•
Pauses entered at the end of telephone numbers are always 10 seconds long.
G To specify the subaddress and password:
❑
Press [Sub-address] on the screen for specifying the fax number.
❑
Press [Subaddress] and [Password] © enter the subaddress and password
(numeric keys) © press [OK].
using -
0 9
To delete the number you entered, press
You can enter up to 20 digits for both the subaddress and password.
To enter a space, press [Space].
To delete the last character, press [Backspace].
If the other party did not set an RX password for the target subaddress, you
do not need to enter a password.
Specifying a Destination Not Registered in the Address Book (New Address)
(Clear).
C
(Clear).
C
1
1-41