Canon imageRunner 2220i User Manual page 180

- If SDL or SSO is not set as the login service:
sender's name <e-mail address registered in Device Information settings for this
machine>
- If SDL is set as the login service:
login user's name <the login user's e-mail address>
•
If SDL is set as login service, you can send jobs only if the e-mail address of the
user who logged on to the machine is registered. For details of the registration, see
the MEAP SMS Administrator Guide.
•
If SSO is set as the login service, the login user's Full name and e-mail address
that you registered for Active Directory or NetSpot Accountant are displayed on the
From field on the e-mail recipient's machine.
- If SDL or SSO is not set as the login service:
sender's name <e-mail address registered in Device Information settings for this
machine>
- If SSO is set as the login service:
login user's Full name <the login user's e-mail address>
•
If SSO is set as login service, you can send jobs only if the e-mail address of the
user who logged on to the machine through Active Directory or NetSpot
Accountant is registered. For details on the registration, consult your administrator
of Active Directory or NetSpot Accountant.
•
For instructions on storing an e-mail address of this machine, see the Network
Guide.
12
Press the E-mail Priority drop-down list © select a priority for
your e-mail message.
Configuring Send Settings (Send Settings)
1
1-159