Sending A Job To A File Server - Canon imageRunner 2220i User Manual

Sending a Job to a File Server

You can send a job to a Windows 95/98/Me server, a Windows NT server, a
Windows 2000/XP server, a NetWare server, or an FTP server. This feature
enables you to specify the document name and the file type of the image you are
sending.
1
IMPORTANT
•
When you send a job to an FTP server, be sure to enter characters in ASCII code. If you
enter characters in a code other than ASCII code, the name of the sending document
cannot be displayed correctly at the sending destination.
•
If you enter the characters not recognizable by the operation system of the file server you
are sending to, you may not be able to send your image or document.
1
1-170 Configuring Send Settings (Send Settings)
Place your originals © specify the File Server destination ©
press [Send Settings].
NOTE
•
For details on specifying addresses using the Address Book, see "Specifying a
Destination Using the Address Book (Address Book)," on p. 1-37.
•
For details on specifying addresses not registered in the Address Book, see
"Specifying a Destination Not Registered in the Address Book (New Address)," on
p. 1-39.
•
For details on specifying addresses using the one-touch buttons, see "Specifying a
Destination Using One-Touch Buttons (One-Touch Buttons)," on p. 1-64.
•
For details on specifying addresses and settings using the favorites buttons, see
"Configuring the Favorites Buttons (Favorites Buttons)," on p. 1-66.
•
For details on scan settings, see "Selecting a Scan Mode," on p. 1-83.