Sending A Job To A Fax - Canon imageRunner 2220i User Manual

Sending a Job to a Fax

You can select Memory Sending or Direct Sending to send scanned documents.
You can set the sender's name and type of sending in the fax.
NOTE
To send documents to another fax machine, it is necessary for the Super G3 Fax Board
(optional) to be installed.
I
Memory Sending
All of the originals to be sent are first scanned and read into memory, then sent. This
means that you do not need to stay near the machine once the originals have been
scanned.
NOTE
The memory can hold a total of about 3,700 pages for sending and received documents.
I
Direct Sending
The scanning of the originals begins when the machine is ready for fax sending. You can
send directly if you do not scan the originals into memory.
IMPORTANT
•
You can directly send an original of two or more sheets only when using the feeder. When
placing an original on the platen glass and sending it directly, you can send only one
original at a time.
•
You can specify only one destination at a time for direct sending.
•
Memory sending is automatically selected when Delayed Send or sending to multiple
destinations is specified.
•
If you cancel Direct Sending during transmission, the originals that have already been
scanned are sent.
1
Place your originals © specify the Fax destination © press
[Send Settings].
Configuring Send Settings (Send Settings)
1
1-149