NOTE
•
For Recipient settings, see "Specifying a Destination Using the Address Book
(Address Book)," on p. 1-37.
•
You cannot select multiple destinations.
10
Press [Sender's Names (TTI)].
11
Select the name of the sender © press [OK].
The name registered under <00> is selected by default.
If the desired sender's name is not displayed, press [M] or [L] to scroll to the
desired sender's name.
You can also enter the two digit number of the sender's name using
(numeric keys).
Configuring Send Settings (Send Settings)
1
-
9
0
1-167