Troubleshooting; Projector Functionality; Projector Does Not Turn On; Cannot Establish Communication With Projector - Christie CP2208 User Manual

Troubleshooting

The following topics cover common projector issues and their solutions.
If an issue cannot be resolved, contact a Christie qualified technician.

Projector functionality

The following topics cover common projector issues and their solutions.

Projector does not turn on

When I attempt to power on the projector, it does not turn on.
Resolution
• Verify the power cord is connected to the projector and the AC power supply correctly and the
input selector switch is in the correct position.
• Verify the wall circuit breaker is on. If there is a problem with the wall circuit breaker turning
off, contact a certified electrician.

Cannot establish communication with projector

The input devices cannot communicate with the projector.
Resolution
• Verify all input devices have the same subnet mask and gateway, and unique IP addresses.

Lamp functionality

The following topics cover common lamp issues and their solutions.

Lamp does not ignite

The projector is powered on but the lamp does not ignite.
Resolution
• Listen for a clicking noise that indicates the ballast is attempting to strike the lamp. If you do
not hear a clicking noise, there might be a problem with the ballast. Contact a Christie
accredited service technician to resolve the issue.
• If you hear a brief clicking noise, but the lamp does not ignite, replace the lamp.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
82