Cabinet Requirements For An Ex9200 Switch; Table 34: Cabinet Requirements And Specifications For An Ex9200 Switch - Juniper EX9214 Hardware Manual

Cabinet Requirements for an EX9200 Switch

Copyright © 2015, Juniper Networks, Inc.
You can mount an EX9200 switch on a cabinet that contains a 19-in. rack as defined in
Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310-D)
published by the Electronics Industry Association (
Cabinet requirements consist of:
Cabinet size and clearance
Cabinet airflow requirements
Table 34 on page 73 summarizes cabinet requirements and specifications for EX9200
switches.

Table 34: Cabinet Requirements and Specifications for an EX9200 Switch

Cabinet Requirement
Cabinet size and clearance
Chapter 6: Preparation Overview
) .
http://www.eia.org
Guidelines for the EX9200 Switch
The minimum cabinet size that can
accommodate the switch is 482 mm wide
and 800 mm deep. A cabinet larger than the
minimum requirement provides better
airflow and reduces the chance of
overheating. To accommodate a single
switch, the cabinet must be at least 13 U
high.
A U is the standard rack unit defined in
Cabinets, Racks, Panels, and Associated
Equipment (document number EIA-310–D)
published by the Electronics Industry
http://www.eia.org
Association (
The minimum front and rear clearance
requirements depend on the mounting
configuration you choose. The minimum
total clearance inside the cabinet is 30.7 in.
between the inside of the front door and the
inside of the rear door.
) .
73