Moving The Mounting Brackets For Center-Mounting An Ex9200 Switch; Mounting An Ex9200 Switch On A Rack Or Cabinet Using A Mechanical Lift - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation

Moving the Mounting Brackets for Center-Mounting an EX9200 Switch

Related
Documentation

Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift

134
Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift on page 134
Moving the Mounting Brackets for Center-Mounting an EX9200 Switch on page 134
Two removable mounting brackets are attached to the mounting holes closest to the
front of the chassis. You can move the pair of brackets to another position on the side of
the chassis for center-mounting the switch.
To move the mounting brackets from the front of the chassis toward the center of the
chassis:
Remove the three screws at the top and center of the bracket.
1.
Pull the top of the bracket slightly away from the chassis. The bottom of the bracket
2.
contains a tab that inserts into a slot in the chassis.
Pull the bracket away from the chassis so that the tab is removed from the chassis
3.
slot.
Insert the bracket tab into the slot in the bottom center of the chassis.
4.
Align the bracket with the two mounting holes located toward the top center of the
5.
chassis.
There is no mounting hole in the center of the chassis that corresponds to the hole in
the center of the bracket.
Insert the two screws at the top of the bracket and tighten each partially.
6.
Two screws are needed for mounting the bracket on the center of the chassis. You
do not need the third screw.
Tighten the two screws completely.
7.
Repeat the procedure for the other bracket.
8.
Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift on page 134
Mounting an EX9204 Switch on a Rack or Cabinet Without Using a Mechanical Lift
Mounting an EX9208 Switch on a Rack or Cabinet Without Using a Mechanical Lift
Installing a Mounting Shelf in a Rack or Cabinet for an EX9204 Switch
Installing a Mounting Shelf in a Rack or Cabinet for an EX9208 Switch
Installing a Mounting Shelf in a Rack or Cabinet for an EX9214 Switch on page 132
Because of the size and weight of the switch, we strongly recommend using a mechanical
lift to install the switch.
Copyright © 2015, Juniper Networks, Inc.