Installing And Removing Ex9214 Switch Hardware Components; Figure 39: Installing The Switch In An Open-Frame Rack - Juniper EX9214 Hardware Manual

Related
Documentation

Installing and Removing EX9214 Switch Hardware Components

Copyright © 2015, Juniper Networks, Inc.

Figure 39: Installing the Switch in an Open-Frame Rack

Powering On an AC-Powered EX9200 Switch on page 148
Powering On a DC-Powered EX9200 Switch on page 153
Connecting and Configuring an EX9200 Switch (CLI Procedure) on page 164
The field-replaceable units (FRUs) in an EX9214 switch are:
Routing Engine module (RE module)
Switch Fabric module (SF module)
Line cards
SFP, SFP+, QSFP+, and CFP transceivers
Power supplies (AC and DC)
Fan tray
The RE module and SF module are hot-removable or hot-pluggable depending on the
configuration of the switch. See "EX9214 Switch Configurations" on page
Chapter 11: Installing the Switch
7.
137