Removing An Ex9200 Switch From A Rack Or Cabinet Using A Mechanical Lift - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation

Removing an EX9200 Switch from a Rack or Cabinet Using a Mechanical Lift

172
Attach the ESD grounding strap to your bare wrist, and connect the strap to the ESD
4.
point on the chassis.
Move the AC input switch on each AC power supply or the DC circuit breaker on each
5.
DC power supply to the Off (
Powering On an AC-Powered EX9200 Switch on page 148
Powering On a DC-Powered EX9200 Switch on page 153
Connecting AC Power to an EX9204 Switch
Connecting DC Power to an EX9204 Switch
Connecting AC Power to an EX9208 Switch
Connecting DC Power to an EX9208 Switch
Connecting AC Power to an EX9214 Switch on page 145
Connecting DC Power to an EX9214 Switch on page 149
Considering the size and weight of the switch, we strongly recommend you use a
mechanical lift to remove the switch.
Before you remove the switch using a lift:
Ensure that the rack or cabinet is stable and secured to the building.
Ensure that there is enough space to place the removed switch in its new location and
shift it along the path to the new location.
Read "General Safety Guidelines and Warnings" on page
to "Chassis Lifting Guidelines for EX9200 Switches" on page
Ensure that the switch has been safely powered off (see
Switch" on page 171) and that you have disconnected the power cords from the power
supplies.
Ensure that you have disconnected any cables or wires attached to the switch ports.
CAUTION: When removing more than one switch from a rack or cabinet,
remove the switch in the top of the rack or cabinet first and proceed to remove
the rest of the switches from top to bottom.
Ensure that you have the following parts and tools available:
A mechanical lift
A Phillips (+) screwdrivers, number 1 and 2
) position.
O
Copyright © 2015, Juniper Networks, Inc.
271, with particular attention
281.
"Powering Off an EX9200