Parts Inventory (Packing List) For An Ex9214 Switch; Figure 37: Unpacking A Line Card Used In An Ex9200 Switch - Juniper EX9214 Hardware Manual

Related
Documentation

Parts Inventory (Packing List) for an EX9214 Switch

Copyright © 2015, Juniper Networks, Inc.
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage (see "Prevention of Electrostatic Discharge Damage" on page
Ensure that you know how to handle and store the line card (see
Line Cards in EX9200 Switches" on page
To unpack a line card (see
Move the shipping carton to a staging area as close to the installation site as possible.
1.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Pull out the packing material, which holds the line card in place.
4.
Remove the line card from the antistatic bag.
5.
Save the shipping carton and packing materials in case you need to move or ship the
6.
line card later.

Figure 37: Unpacking a Line Card Used in an EX9200 Switch

Installing a Line Card in an EX9200 Switch on page 210
EX9204 Switch Hardware Overview
EX9208 Switch Hardware Overview
EX9214 Switch Hardware Overview on page 3
The EX9214 switches are shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box.
The switch shipment includes a packing list. Check the parts you receive in the switch
shipping crate against the items on the packing list. The packing list specifies the part
number and provides description of each part in your order. The parts shipped depend
on the configuration you order. See
information.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
205).
Figure 37 on page 127):
"EX9214 Switch Configurations" on page 7
Chapter 10: Unpacking the Switch
305).
"Handling and Storing
for more
127