Line Card Components; Ex9200-32Xs Line Card; Figure 26: Ex9200-32Xs Line Card - Juniper EX9214 Hardware Manual

Hide thumbs Also See for EX9214:
Table of Contents

Advertisement

EX9214 Switch Hardware Guide

Line Card Components

Related
Documentation

EX9200-32XS Line Card

54
You can use the
show version fpc
switches loaded on the line card.
The EX9200-6QS line card has:
Six 40-Gigabit Ethernet quad small form-factor pluggable plus (QSFP+) ports which
can house six 40-gigabit QSFP+ transceivers. These ports support 40GBASE-LR4 and
40GBASE-SR4 transceivers.
Twenty-four 10-Gigabit Ethernet small-form factor pluggable (SFP+) ports, which can
house twenty-four 10-gigabit small-form factor pluggable (SFP+) transceivers. These
ports support 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, and 10GBASE-ZR transceivers.
Line card LED—LED labeled
See
"Line Card LED in an EX9200 Switch" on page
Network port LED—One LED per network port indicates the link activity and status of
each port. See
"Network Port LEDs in an EX9200 Switch" on page
The ports are divided into two port groups. The six 40-Gigabit Ethernet QSFP+ ports
labeled
2/0
through
2/2
and
10-Gigabit Ethernet SFP+ ports labeled
other port group. The ports in each group share 240 gigabits of bandwidth. Thus, you can
transmit up to 240 gigabits of traffic through a port group, without packet drop.
Line Card Model and Version Compatibility in an EX9200 Switch on page 49
Pluggable Transceivers Supported on EX9200 Switches on page 87
Installing a Line Card in an EX9200 Switch on page 210
Handling and Storing Line Cards in EX9200 Switches on page 205
Troubleshooting Traffic Drops on EX9200-6QS Line Cards on page 261
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that can be
installed in the line card slots on the front of the switch chassis. The line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions. See

Figure 26: EX9200-32XS Line Card

EX9200-32XS
command to see the version of Junos OS for EX Series
indicates the status information of the line card.
OK/FAIL
59.
3/0
through
3/2
form one port group. The twenty-four
through
0/0
0/11
Figure 26 on page
Copyright © 2015, Juniper Networks, Inc.
33.
and
through
form the
1/0
1/11
54.

Advertisement

Table of Contents
loading

Table of Contents