Line Card Models; Line Card Components; Figure 27: Ex9200-40T Line Card; Table 26: Ex9200-40T Line Card - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide

Line Card Models

Line Card Components

Related
Documentation
56
and replace them without powering off the switch or disrupting switch functions. See
Figure 27 on page 56.

Figure 27: EX9200-40T Line Card

This topic describes:
Line Card Models on page 56
Line Card Components on page 56
Table 26 on page 56 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.

Table 26: EX9200-40T Line Card

Model Description
EX9200-40T 40-port 10/100/1000BASE-T RJ-45
line card
You can use the show version fpc
switches loaded on the line card.
The EX9200-40T line card has:
40 10/100/1000BASE-T RJ-45 ports
Line card LED—LED labeled
See "Line Card LED in an EX9200 Switch" on page
Network port LEDs—Two LEDs per network port that indicate the link activity and
status of each port. See
Line Card Model and Version Compatibility in an EX9200 Switch on page 49
Pluggable Transceivers Supported on EX9200 Switches on page 87
Installing a Line Card in an EX9200 Switch on page 210
Handling and Storing Line Cards in EX9200 Switches on page 205
command to see the version of Junos OS for EX Series
indicates the status information of the line card.
OK/FAIL
"Network Port LEDs in an EX9200 Switch" on page
Junos OS Release Required
12.3R2 or later
59.
33.
Copyright © 2015, Juniper Networks, Inc.