Figure 33: Ac Plug Types - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Australia
(SAA/3)
Japan
(L6-20P)
80

Figure 33: AC Plug Types

China
(PSB-10)
North America
(L6-20P)
WARNING: The AC power cord for the switch is intended for use with the
switch only and not for any other use.
WARNING:
Translation from Japanese: The attached power cable is only for this product.
Do not use the cable for another product.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). You can order AC power cords that are in
compliance.
WARNING: The switch is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal
(sized for UNC 1/4-20 ground lugs) provided on the chassis in addition to the
grounding pin of the power supply cord. This separate protective earthing
terminal must be permanently connected to earth.
Europe Italy
(CEE 7/7) (CEI 23-16/VII)
North America
UK
NEMA
(BS89/13)
(L6-20)
Copyright © 2015, Juniper Networks, Inc.