Ex9214 Switch Hardware And Cli Terminology Mapping - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Table 5: EX9214 Switch Hardware Configurations (continued)
Switch Configuration
EX9214-REDUND3-AC
(redundant configuration with 4100 W AC power supplies)
EX9214-REDUND3-DC
(redundant configuration with 4100 W DC power supplies)
Related
Documentation

EX9214 Switch Hardware and CLI Terminology Mapping

8
NOTE: You can install up to 12 line cards (in any combination) in the switch.
NOTE: Line cards are not part of the base or redundant configuration. You
must order them separately.
NOTE: Power cords and additional power supplies (AC or DC) must be
purchased separately.
Chassis Physical Specifications of an EX9214 Switch on page 13
Routing Engine Module in an EX9200 Switch on page 27
Switch Fabric Module in an EX9200 Switch on page 29
AC Power Supply in an EX9214 Switch on page 39
Cooling System and Airflow in an EX9214 Switch on page 37
EX9214 Switch Hardware Overview on page 3
This topic describes the hardware terms used in EX9214 switch documentation and the
corresponding terms used in the Junos OS command-line interface (CLI). See
Table 6 on page 9.
Configuration Components
Chassis with craft interface and midplane
Three SF modules
Two RE modules
Two fan trays
One air filter kit
Four 4100 W AC power supplies
12 cover panels for empty line card slots
Chassis with craft interface and midplane
Three SF modules
Two RE modules
Two fan trays
One air filter kit
Four 4100 W DC power supplies
12 cover panels for empty line card slots
Copyright © 2015, Juniper Networks, Inc.