Pinout Specifications; Switch; Table 50: Ex9200 Switches Console Port And Aux Port Connector Pinout; Chapter 9 Pinout Specifications - Juniper EX9214 Hardware Manual

CHAPTER 9

Pinout Specifications

Console Port and AUX Port Connector Pinout Information for an EX9200 Switch
Copyright © 2015, Juniper Networks, Inc.
Console Port and AUX Port Connector Pinout Information for an EX9200
Switch on page 119
USB Port Specifications for an EX Series Switch on page 120
Ethernet Port Connector Pinout Information for an EX9200 Switch on page 121
RJ-45 to DB-9 Serial Port Adapter Pinout Information for a Switch on page 122
The console port and AUX port on an EX Series switch are RS-232 serial interfaces. These
ports connect the switch to an auxiliary or console management ports.
Table 50 on page 119 provides the pinout information for the RJ-45 connector. An RJ-45
cable and an RJ-45 to DB-9 serial port adapter are supplied with the switch.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to an EX9200 switch, use a
combination of the RJ-45 to DB-9 female adapter supplied with the switch
and a USB to DB-9 male adapter. You must provide the USB to DB-9 male
adapter.

Table 50: EX9200 Switches Console Port and AUX Port Connector Pinout

Information
Pin Signal
1 RTS
2 DTR
3 TxD
4 Ground
5 Ground
6 RxD
Description
Request to send
Data terminal ready
Transmit data
Signal ground
Signal ground
Receive data
119