Ex9200-40F Line Card; Line Card Models; Line Card Components; Figure 28: Ex9200-40F Line Card - Juniper EX9214 Hardware Manual

EX9200-40F Line Card

Line Card Models

Line Card Components

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that can be
installed in the line card slots on the front of the switch chassis. The line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions. See

Figure 28: EX9200-40F Line Card

This topic describes:
Line Card Models on page 57
Line Card Components on page 57
Table 27 on page 57 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.

Table 27: EX9200-40F Line Card

Model Description
EX9200-40F 40-port 100FX/1000BASE-X SFP
line card
You can use the
show version fpc
switches loaded on the line card.
The EX9200-40F line card has:
40 100FX/1000BASE-X SFP ports
40 dust covers (shipped in an accessory bag)
Line card LED—LED labeled
See "Line Card LED in an EX9200 Switch" on page
Network port LED—One LED per network port indicates the link activity and status of
each port. See "Network Port LEDs in an EX9200 Switch" on page
Line Card Model and Version Compatibility in an EX9200 Switch on page 49
Pluggable Transceivers Supported on EX9200 Switches on page 87
Figure 28 on page
command to see the version of Junos OS for EX Series
indicates the status information of the line card.
OK/FAIL
59.
Chapter 5: Line Cards
57.
Junos OS Release Required
12.3R2 or later
33.
57