Line Card Led In An Ex9200 Switch; Table 29: Led On Line Cards For Ex9200 Switches - Juniper EX9214 Hardware Manual

Related
Documentation

Line Card LED in an EX9200 Switch

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Network port LED—One LED per network port indicates the link activity and status of
each port. See "Network Port LEDs in an EX9200 Switch" on page
Line Card Model and Version Compatibility in an EX9200 Switch on page 49
Pluggable Transceivers Supported on EX9200 Switches on page 87
Installing a Line Card in an EX9200 Switch on page 210
Handling and Storing Line Cards in EX9200 Switches on page 205
The line cards in EX9200 switches have an LED labeled
indicates the online status information of line cards.
Table 29 on page 59 describes the LED on line cards for EX9200 switches, its colors and
state, and the status it indicates.

Table 29: LED on Line Cards for EX9200 Switches

LED Color
Green
OK/FAIL
Unlit
Red
EX9204 Switch Hardware Overview
EX9208 Switch Hardware Overview
EX9214 Switch Hardware Overview on page 3
OK/FAIL
State and Description
On steadily—The line card is functioning normally.
Blinking—The line card is transitioning online or offline.
The line card is not online.
The line card has failed.
Chapter 5: Line Cards
33.
on the faceplate that
59