Ex9200-4Qs Line Card; Line Card Models; Line Card Components; Figure 24: Ex9200-4Qs Line Card - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation

EX9200-4QS Line Card

Line Card Models

Line Card Components

52
group share 120 gigabits of bandwidth. Thus, you can transmit up to 120 gigabits of traffic
through a port group, without packet drop.
Line Card Model and Version Compatibility in an EX9200 Switch on page 49
Pluggable Transceivers Supported on EX9200 Switches on page 87
Installing a Line Card in an EX9200 Switch on page 210
Handling and Storing Line Cards in EX9200 Switches on page 205
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that can be
installed in the line card slots on the front of the switch chassis. The line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions. See

Figure 24: EX9200-4QS Line Card

This topic describes:
Line Card Models on page 52
Line Card Components on page 52
Table 23 on page 52 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.

Table 23: EX9200-4QS Line Card

Model Description
EX9200-4QS 4-port 40-Gigabit Ethernet QSFP+
line card
You can use the
show version fpc
switches loaded on the line card.
The EX9200-4QS line card has:
Four 40-Gigabit Ethernet QSFP+ ports
Four dust covers preinstalled in the network ports
Figure 24 on page
Junos OS Release Required
12.3R2 or later
command to see the version of Junos OS for EX Series
Copyright © 2015, Juniper Networks, Inc.
52.