Ex9200-6Qs Line Card; Line Card Models; Figure 25: Ex9200-6Qs Line Card; Table 24: Ex9200-6Qs Line Card - Juniper EX9214 Hardware Manual

Related
Documentation

EX9200-6QS Line Card

Line Card Models

Copyright © 2015, Juniper Networks, Inc.
Line card status LED—LED labeled
"Line Card LED in an EX9200 Switch" on page
Network port LED—LED labeled
link activity status of the port. See
Line Card Model and Version Compatibility in an EX9200 Switch on page 49
Pluggable Transceivers Supported on EX9200 Switches on page 87
Installing a Line Card in an EX9200 Switch on page 210
Handling and Storing Line Cards in EX9200 Switches on page 205
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces in a single assembly. Line cards are field-replaceable units (FRUs) that can
be installed in the line card slots on the front of the switch chassis. The line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions. See

Figure 25: EX9200-6QS Line Card

This topic describes:
Line Card Models on page 53
Line Card Components on page 54
Table 24 on page 53 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.

Table 24: EX9200-6QS Line Card

Model Description
EX9200-6QS 6-port 40-Gigabit
Ethernet, 24-port
10-Gigabit Ethernet line
card
indicates the status of the line card. See
OK/FAIL
59.
Link located next to the network port indicates the
"Network Port LEDs in an EX9200 Switch" on page
Figure 25 on page
Junos OS Release Required
14.2R1 or later
CAUTION: Junos OS Release 14.2R1 supports the
EX9200-6QS line card except for one specific
Junos OS 14.2R2 Release
configuration. See the
Notes for Known Issue PR1068396 to determine
whether that configuration applies to your switch and
which release to use if the configuration does apply.
Chapter 5: Line Cards
33.
53.
53