Installing An Sf Module In An Ex9200 Switch - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation

Installing an SF Module in an EX9200 Switch

200
Hardware inventory:
Item Version
Chassis
Midplane REV 01
FPM Board REV 04
PEM 0 Rev 10
AC in
PEM 1 Rev 10
AC in
Routing Engine 0 REV 02
Routing Engine 1 REV 02
CB 0 REV 08
CB 1 REV 10
...
Removing an SF Module from an EX9200 Switch on page 203
Installing an SF Module in an EX9200 Switch on page 200
The Switch Fabric module (SF module) in an EX9200 switch is a hot-insertable and
hot-removable field-replaceable unit (FRU); You can remove and replace it while the
switch is running without turning off power to the switch or disrupting switching functions.
NOTE: Do not lift the SF module by holding the ejector handles. The ejector
handles cannot support the weight of the module. Lifting the module by the
ejector handles might bend the ejector handles. Bent ejector handles prevent
the SF module from being properly seated in the chassis.
Before you begin installing an SF module:
Ensure you understand how to prevent electrostatic discharge (ESD) damage. See
"Prevention of Electrostatic Discharge Damage" on page
Ensure that you have the following parts and tools available:
ESD grounding strap
To install an SF module:
Attach the ESD grounding strap to your bare wrist, and connect the strap to one of
1.
the ESD points on the chassis.
If the slot has a cover panel on it, rotate the ejector handles simultaneously
2.
counterclockwise to unseat the cover panel.
Grasp the ejector handles, and slide the cover panel out of the chassis. Save the cover
3.
panel for later use.
Taking care not to touch the leads, pins, or solder connections, pull the SF module
4.
out from the bag.
Part number Serial number
JN1221A03RFC
750-053633 ACRA1451
760-021392 ABCB4822
740-029970 QCS1251U020
740-029970 QCS1251U028
740-049603 9009153805
740-049603 9009153993
750-048307 CABC6474
750-048307 CABH8948
Copyright © 2015, Juniper Networks, Inc.
Description
EX9204
EX9204-BP
Front Panel Display
PS 1.4-2.52kW; 90-264V
PS 1.4-2.52kW; 90-264V
RE-S-EX9200-1800X4
RE-S-EX9200-1800X4
EX9200-SF2
EX9200-SF2
305.