Table 6: Cli Equivalents Of Terms Used In Documentation For Ex9214 - Juniper EX9214 Hardware Manual

Table 6: CLI Equivalents of Terms Used in Documentation for EX9214 Switches
Hardware
Item (CLI) Description (CLI)
Chassis EX9214
Midplane EX9214-BP
FPM Board Front Panel Display
PEM(n) One of the following:
PS 4.1 kW;
200-240 V AC in
DC 2.4 kW Power
Entry Module
Routing RE-S-EX9200-1800X4
Engine (n)
CB (n) EX9200-SCBE
Copyright © 2015, Juniper Networks, Inc.
Value (CLI)
–
–
–
n is a value in the range of
0–3. The value corresponds
to the power supply slot
number.
n is a value in the range 0
through 1.
In base configuration, only
one entry appears.
In a redundant configuration,
two entries appear; one for
each Routing Engine module
(RE module) installed in the
chassis.
n is a value in the range of
0–2.
Multiple line items appear in
the CLI if more than one
Switch Fabric modules (SF
modules) are installed in the
chassis.
CB0, CB1, and CB2 stand for
SF modules.
Chapter 1: Switch Overview
Item In
Documentation Additional Information
Switch chassis "Chassis Physical
Specifications of an
EX9214 Switch" on
page 13
Switch midplane "Midplane in an EX9200
Switch" on page 25
Craft interface "Craft Interface in an
EX9200 Switch" on
page 20
AC or DC power supply AC Power Supply in
an EX9214 Switch on
page 39
DC Power Supply in
an EX9214 Switch on
page 43
RE module "Routing Engine Module
in an EX9200 Switch" on
page 27
SF module "Switch Fabric Module in
an EX9200 Switch" on
page 29
9