40-Gbps Channelization; Figure 7: All Ports Are 40-Gigabit Ethernet By Default; Figure 8: 100-Gigabit Ethernet Ports Are Indicated By A Black Line Underneath; The Port - Juniper QFX10002 Hardware Manual

QFX10002 Switch Hardware Guide
30
Figure 7 on page 30 shows one of the six 6XQSFP+ cages on a QFX10002-36Q.

Figure 7: All Ports are 40-Gigabit Ethernet by Default

Figure 8: 100-Gigabit Ethernet Ports Are Indicated by a Black Line Underneath the Port
Figure 9: 100-Gigabit Ethernet Port Disables Two Associated 40-Gigabit Ethernet Ports
in the Port Group

40-Gbps Channelization

The 40-Gigabit Ethernet ports can operate independently or be bundled with the next
two consecutive ports and channelized into twelve 10-Gigabit Ethernet ports as a port
group. Like 100-Gigabit channelization, only the first and fourth port in each 6XQSFP
cage are available to channelize a port group (see
must be configured using the
example, to channelize the first switch port, use the
command.
channel-speed 10g
NOTE: You cannot channelize an individual port. Channelizing configures all
three ports in the port range to four independent 10-Gigabit Ethernet.
Figure 10 on page
set chassis fpc pic port channel-speed
set chassis fpc 0 pic 0 port 1
Copyright © 2019, Juniper Networks, Inc.
31. The port group
command. For