Ex9200-4Qs Line Card - Juniper EX9214 Hardware Manual

EX9200-4QS Line Card

IN THIS SECTION
Line Card Models | 86
Line Card Components | 87
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet interfaces on a
single assembly. They are field-replaceable units (FRUs) that you can install in the line card slots on the
front of the switch chassis. Line cards are hot-insertable and hot-removable: You can remove and replace
them without powering off the switch or disrupting switch functions.
Line Card Models
Table 29 on page 86 shows the model number, description of the line card model, and the Junos OS
release in which the line card was first supported.
Table 29: EX9200-4QS Line Card
Model Description
EX9200-4QS A line card with four 40-Gigabit Ethernet ports, each of which can
house 40-gigabit quad small form-factor pluggable plus (QSFP+)
transceivers
See Figure 27 on page 86.
Figure 27: EX9200-4QS Line Card
Junos OS Release
Required
12.3R2 or later
86