Removing The Center-Mounting Brackets; Figure 32: Installing The Mounting Hardware For A Four-Post Rack - Juniper PTX Series Hardware Manual

PTX5000 Packet Transport Switch Hardware Guide

Removing the Center-Mounting Brackets

70

Figure 32: Installing the Mounting Hardware for a Four-Post Rack

1
1— Rear support bracket
The center-mounting brackets are not used for a four-post rack, and must be removed
from the chassis.
To remove the center-mounting brackets from the chassis:
Loosen the screws from each bracket (see
1.
Remove each bracket.
2.
2— Four-post mounting shelf
Figure 33 on page 71).
Copyright © 2012, Juniper Networks, Inc.
2