Debug Ip Bgp - Dell S4810 Reference Manual

Version 7.7.1.0

debug ip bgp

Display all information on BGP, including BGP events, keepalives, notifications, and updates.
S4810
Syntax
debug ip bgp [ vrf vrf-name | ip-address | peer-group peer-
group-name] [in | out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
vrf vrf-name
ip-address
peer-group
peer-group-
name
in
out
A.B.C.D
X:X:X:X::X
dampening
events
ipv4
ipv6
keepalives
notifications
soft-
reconfiguration
updates
Border Gateway Protocol
Introduced on the C-Series.
Enter the keyword vrf and then the name of the VRF to
debug BGP information corresponding to that VRF.
NOTE: Use this attribute to debug BGP protocol
operations corresponding to either a default or non-
default VRF.
Enter the IP address of the neighbor in dotted decimal
format.
Enter the keywords peer-group then the name of the peer
group to debug.
(OPTIONAL) Enter the keyword in to view only information
on inbound BGP routes.
(OPTIONAL) Enter the keyword out to view only information
on outbound BGP routes.
Enter the IP address of peer in the A.B.C.D format.
Enter the IPv6 IP address of peer in the X:X:X:X::X format.
Enter the keyword dampening to view BGP dampening.
Enter the keyword events to view BGP protocol events.
Enter the ipv4 IP address to view the IPV4 route information.
Enter the ipv6 IP address to view the IPV6 route information.
Enter the keyword keepalives to view BGP keepalives.
Enter the keyword notifications to view BGP
notifications.
Enter the keywords soft-reconfiguration to view only
information on inbound BGP soft reconfiguration.
Enter the keyword updates to view BGP updates.
403