Redundancy Reset-Counter - Dell S4810 Reference Manual

Parameters
lacp
xstp
Default Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.6.1.0
Related
•
Commands
•

redundancy reset-counter

Reset failover counter and timestamp information displayed in the show redundancy command.
S4810
Syntax
redundancy reset-counter
Default Not configured.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
High Availability (HA)
Enter the keyword lacp to make LACP hitless.
Enter the keyword xstp to invoke hitless STP (all STP modes
— MSTP, PVST+, RSTP, and STP).
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced on the E-Series ExaScale.
Introduced on the E-Series.
show lacp — displays the lacp configuration.
show redundancy — displays the current redundancy configuration.
699