Show Ip Bgp Dampened-Paths - Dell S4810 Reference Manual

Weight Path
*>
172.16.0.2
Dell#show ip bgp 55.0.0.0/24
BGP routing table entry for 55.0.0.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
172.16.0.2 (172.16.0.2)
Weight
Communities :

show ip bgp dampened-paths

View BGP routes that are dampened (non-active).
S4810
Syntax
show ip bgp [vrf vrf-name] [ipv4 unicast] dampened-paths
Parameters
vrf vrf-name
ipv4 unicast
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
456
Network
55.0.0.0/24
AS_PATH : 200
Next-Hop : 172.16.0.2, Cost : 0
Origin IGP, Metric
0, external
200:1 1000:1
(OPTIONAL) Enter the keywords vrf and then the name of
the VRF to view routes that are affected by a specific
community list corresponding to that VRF.
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
EXEC
EXEC Privilege
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Next Hop
Best
4294967295 (Default), LocalPref
3000:1
Metric LocPrf
0 200 i
100,
Border Gateway Protocol