Engine Mount Installation - Mazda 626 MX-6 Workshop Manual

1
INSTALLATION
Engine Mount
Install the engine mount.
Non-Turbo:
Turbo:
1—84
85—117 N-m
Exhaust Pipe
1. Install the exhaust pipe.
Tightening torque:
® : 31 —46 N-m
(3.2—4.7 m-kg, 23—34 ft-lb)
(§): 64—89 N-m
(6.5—9.1 m-kg, 47—66 ft-lb)
2. Tighten the bracket bolt.
Tightening torque:
19—25 N m (1.9—2.6 m-kg, 14—19 ft-lb)
Extension Bar (MTX)
Install the extension bar to the transaxle.
Tightening torque:
31—46 N-m (3.2—4.7 m-kg, 23—34 ft-lb)
Change Rod (MTX)
Install the change rod to the transaxle.
Tightening torque:
16—22 N m (1.6—2.3 m-kg, 12—17 ft-lb)
ft-lb)
86U01X-181