Camshaft - Mazda 626 MX-6 Workshop Manual

DISASSEMBLY (CYLINDER HEAD)
Disassembly note

Camshaft

Before removing the rocker arm and shaft assembly,
clean the bearings and journals, and measure the fol­
lowing:
1. Camshaft end play. (Refer to page 1—48.)
2. Camshaft journals oil clearance. (Refer to page
1 -4 8 .)
86U01X-066
Rocker arm and shaft assembly
1. Loosen the bolts in two or three steps in the order
shown in the figure.
2. Remove the rocker arm and shaft assembly togeth­
er with the bolts.
Caution
a) Do not mixup the various parts of the rock­
er arm and shaft assembly.
b)Do not remove the HLA unless necessary.
86U01X-067
Cylinder head bolt
Loosen the cylinder head bolts in two or three steps
in the order shown in the figure.
86U01X-068
Valve
Remove the valves from the cylinder head with the
SST
86U01X-069
1
1 -3 7