ASSEMBLY (CYLINDER BLOCK)
Oil Pan
1. Apply a continuous bead of silicon sealant to the
oil pan along the inside of the bolt holes, and over
lap the ends.
2. Install the oil pan.
Tightening torque:
7—12 Nm (70—120 cm-kg, 61—104 in-lb)
86U01X-137
Flywheel (MTX), Drive Plate (ATX)
1. Remove any old sealant from the bolts and bolt
holes. If old sealant can not removed from the bolt,
replace it.
2. Apply sealant to the bolt threads.
(MTX)
3. Install, and tighten the flywheel with the SST.
Tightening torque:
96—103 N m (9.8—10.5 m-kg, 71—76 ft-lb)
86U01X-139
(ATX)
3. Install, and tighten the drive plate adapter, drive
plate and backing plate with the SST.
Tightening torque:
96—103 N m (9.8—10.5 m-kg, 71—76 ft-lb)
86U01X-140
1
1 -65