Mazda 626 MX-6 Workshop Manual page 429

Primary Shaft
1. Install the new bearing inner race with the SST.
Note
Press to 19,620 N (2,000 kg, 4,400 lb).
86U07A-069
2. Install the 3rd gear, synchronizer ring, and clutch
hub assembly with the SST.
Note
a) Press to 19,620 N (2,000 kg, 4,400 lb).
b) Align the synchronizer ring groove and
clutch housing hub key when installing.
86U07A-070
3. Install the retaining ring.
4. Install the synchronizer ring, 4nd gear, and bear­
ing inner race with the SST.
Note
Press to 19,620 N (2,000 kg, 4,400 lb).
86U07A-071
5. Install both shift forks and the interlock sleeve, as
in the figure.
86U07A-072
7A
ASSEMBLY
7 A—31