Hydraulic Lash Adjuster (Hla); Camshaft Cap, Rocker Arm And Shaft Assembly - Mazda 626 MX-6 Workshop Manual

ASSEMBLY (CYLINDER HEAD)
Camshaft
1. Apply a liberal amount of engine oil to the journals
and bearings.
2. Place the camshaft in position with the dowel pin
facing straight up.

Hydraulic Lash Adjuster (HLA)

1. Pour engine oil into the oil reservoir in the rocker
arm.
2. Apply engine oil to the new HLA.
3. Carefully install the HLA into the rocker arm.
Caution
Be careful not to damage the O-ring when in­
stalling the HLA.

Camshaft Cap, Rocker Arm and Shaft Assembly

1. Assemble the rocker arm and shaft assembly as
shown in the figure.
Note
a) The intake side shaft has twice as many oil
holes as the exhaust side shaft.
b) The stepped ends are the rear of the shafts.
2. Apply silicon sealant to the areas shown in the
figure.
1
1 -6 9