49 G030 440
22. Shift to 1st gear.
23. Lock the primary shaft with the SST.
24. Tighten new lock nuts.
Tightening torque: 128— 196 N-m
(13.0— 20.0 m-kg, 94— 145 ft-lb)
25. Stake the lock nuts.
86U07A-119
26. Clean and coat the both surfaces and install the
rear cover.
Tightening torque: 8— 11 N-m
(80— 110 cm-kg, 68— 95 in-lb)
86U07A-120
7A
ASSEMBLY
7 A -4 7