4B
INTAKE AIR SYSTEM
4B—40
PARTS INSPECTION
Air Cleaner Element
1. Check the condition of the air cleaner element.
2. Replace, if necessary.
Caution
Do not use the compressed air to clean the
air cleaner element.
I
69G04A-059
Accelerator Cable
1. Inspect the deflection of
tion is not within 1— 3 mm (0.04— 0.12 in.), ad
just by turning nuts A.
2. Depress the accelerator pedal to the floor and con
firm that the throttle valve is fully opened. Adjust
by turning bolt B if necessary.
Throttle Body
Note
The No. 2 throttle valve is preset at the facto
ry to begin opening after the No. 1 throttle
valve has opened approx. 25 degrees (MTX)
or 10 degrees (A TX ).
1. Check that the No. 1 and No. 2 throttle valves move
smoothly when the throttle lever is moved from fully
closed to fully open.
2. Replace, if necessary.
86U04A-054
Caution
Do not remove the thin sealing coating from
the throttle valve or bore.
69G04C-050
the cable. If the deflec