Engine Mount; Exhaust Pipe; Extension Bar; Change Rod - Mazda 626 1989 Workshop Manual

Engine Mount

Install the engine mount.
74—103 N-m (7.5—10.5 m-kg, 54—76 ft-lb)

Exhaust Pipe

1. install the exhaust pipe.
Tightening torque
(A): 31—46 N m
(3.2—4.7 m-kg, 23—34 ft-lb)
® :
64—89 N m
(6.5—9.1 m-kg, 47—66 ft-lb)
2. Tighten the bracket bolt.
Tightening torque:
19—25 N m (1.9—2.6 m-kg, 14—19 ft-lb)

Extension Bar

Install the extension bar to the transaxle.
Tightening torque:
31—46 Nm (3.2—4.7 m-kg, 23—34 ft-lb)

Change Rod

Install the change rod to the transaxle.
Tightening torque:
16—23 N-m (1.6—2.3 m-kg, 12—17 ft-lb)
76G01B-108
INSTALLATION 1 B
86U01X-181
1B-75