Mazda 626 MX-6 Workshop Manual page 438

7A
ASSEMBLY
/ / / / / / ' / / /
Transaxle case ' / ' y
Diaphragm spring
7A—40
Assembly
1. Install the neutral switch.
2. Install the drain plug.
3. Install the back-up lamp switch.
4. Install the new oil seals with the SST.
86U07A-102
5. Install the differential adjust shim(s) and the bear­
86U07A-103
6. Install the adjust shims, diaphragm spring, funnel,
S S
J . l l l ' II
< < <
Bearing outer race
86U07A-104
7. Install the bearing outer races with a suitable pipe.
86U07A-105
ing outer race with a suitable pipe.
and bearing outer races.
Note
Install the diaphragm spring as shown in the
figure.