Differential; Step 4 - Mazda 626 MX-6 Workshop Manual

7A
DISASSEMBLY
STEP 4 (DIFFERENTIAL)
Disassemble in the sequence shown in the figure referring to disassembly note for the specially marked
parts.
Note
a) If the bearing inner races are removed replace them with new ones.
b) Before disassembly, check the backlash of the side gears and pinion gears.
(Refer to page 7A—29)
7A—24
86U07A-053
Side bearing inner race (side opposite ring gear)
Remove the race from the gear case with the SST.
Caution
Hold the gear case with one hand so that it
does not fall.
Side bearing inner race (ring gear side)
Remove the race with a combination of parts from
the SST.
1. Knock pin
2. Pinion shaft
3. Pinion gear
4. Thrust washer
5. Side gear
6. Thrust washer
7. Side bearing in­
ner race
8. Speedometer
drive gear
9. Side bearing in­
ner race
10. Gear case