Mazda 626 MX-6 Workshop Manual page 453

7A
DISASSEMBLY
49 0839 425C
7A—56
Knock-pin
To remove the knock-pin from the pinion shaft, place
the gear case in a vise and knock the pin out.
Note
Insert the rod into the knock-pin hole from the
ring gear mounting surface side.
61G07X-181
Side bearing inner race (side opposite ring gear)
Remove the bearing inner race with the SST.
Caution
Hold the gear case with one hand so that it
does not fall.
86U07A-140
Side bearing inner race (ring gear side)
Remove the bearing inner race with the SST.
Note
Use pads in the vise.
86U07A-141