Mazda 626 MX-6 Workshop Manual page 477

7A
INSTALLATION
7 A -8 0
6. Install the crossmember and the left side lower arm
as an assembly.
Tightening torque: Bolts, 36—54 N-m
(3.7—5.5 m-kg, 27—40 ft-lb)
Nut, 75—93 Nm
(7.6—9.5 kg, 55—69 ft-lb)
7. Remove the jack and take of the rope.
8. Remove the SST.
86U07A-214
9. Install the starter and harnesses.
Tightening torque:
® . 31—46 N-m
(3.2—4.7 m-kg, 23—34 ft-lb)
(§). 10—12 Nm
(100—120 m-kg, 87—104 ft-lb)
10. Install the surge tank bracket and the gusset plate.
Tightening torque:
© . 19—30 N-m
(1.9—3.1 m-kg, 14—22 ft-lb)
(D . 43—61 N-m
(4.4—6.2 m-kg, 32—45 ft-lb)
11. Install the end plate.
Tightening torque: 8—11 N-m
(80—110 cm-kg, 69—95 in-lb)
12. Install the clutch release cylinder.
Tightening torque: 19—26 N-m
(1.9—2.6 m-kg, 14—19 ft-lb)
13. Install the gusset plates.
Tightening torque: 37—52 N-m
(3.8—5.3 m-kg, 27—38 ft-lb)
86U07A-217