Manual Transaxle Torque Specifications - H-Type Mtx (Turbo) - Mazda 626 MX-6 Workshop Manual

STEP 3
Torque Specifications
Transaxle Case
1. Install the oil passage.
Tightening torque: 8—11 N-m
(80—115 cm-kg, 69—100 in-lb)
2. Install the new oil seal with the SST.
76G07A-638
3. Tap the primary and secondary shaft bearing out­
er races in until they are fully seated with a suit­
able pipe.
Note
Install the differential bearing outer race and
diaphragm springs and adjust shims after ad­
justing the bearing preload.
86U07A-173
626, MX-6 Revised 10/87
7A
ASSEMBLY
86U07A-171
7A-67