DISASSEMBLY (TIMING BELT)
Disassembly note
Crankshaft pulley
1. Set the SST against the flywheel.
2. Remove the crankshaft pulley.
86U01X-222
Timing belt
1. Loosen the tensioner lock bolt, and remove the ten
sioner spring after.
2. Mark the timing belt rotation for proper reinstalla
tion if it is reused.
3. Remove the timing belt.
Caution
Be careful not to allow oil or grease on the
belt.
Camshaft pulley
Remove the pulley lock nut using a screw driver to
prevent the camshaft from turning.
69G01B-074
1
1—35