Mazda 626 MX-6 Workshop Manual page 476

1. Attach rope at 2 places on the transaxle and place
a board on the jack and position the transaxle on it.
Caution
The transaxle is not well balanced; be care­
ful when positioning on the jack.
2. Move the transaxle into the place and attach the
rope (attached to the transaxle in step 1) to the
SST
86U07A-210
3. Install the transaxle onto the engine.
Note
Lift the transaxle using the jack pulling the
rope.
Tightening torque: 89—117 Nm
(9.1—11.9 m-kg, 66—85 ft-lb)
86U07A-211
4. Install the engine mount No. 4 and braket.
Tightening torque: 85—117 N m
(8.7—11.9 m-kg, 63—86 ft-lb)
86U07A-212
5. Install the engine mount No. 2.
Tightening torque:
Non Turbo 37—52 N m
(3.8—5.3 m-kg, 27—38 ft-lb)
Turbo 67—93 Nm
(6.8—9.5 m-kg, 49—69 ft-lb)
© 67—93 N m
(6.8—9.5 m-kg, 49—69 ft-lb)
86U07A-213
7A
INSTALLATION
7 A -7 9