Overrunning Clutch
Turn the pinion shaft by hand and hold the overrun
ning clutch.
Replace the overrunning clutch if the pinion turns in
both directions or in neither direction.
Note
Do not wash the overrunning clutch with sol
vent; it is packed with grease and sealed.
86U05X-035
Internal Gear and Planetary Gears
1. Internal gear
Check for wear or damage. Replace if necessary.
2. Planetary gears
Check for wear or damage. Replace if necessary.
67U05X-057
Yoke
Check for damage. Replace if necessary.
67U05X-058
Bearing
Check for abnormal noise, looseness, binding.
Replace the bearing if there is any problem.
Note
Use a bearing puller to remove the bearings.
67U05X-059
STARTER 5
5 -2 7