Mazda 626 MX-6 Workshop Manual page 428

7A
ASSEMBLY
STEP 2
Note
During assembly, check the thrust clearance of each gear. (Refer to page 7A—32)
7 A—30
Assembly
Install the synchronizer key spring in the clutch hub
with the hook in the groove. This holds the three syn­
chronizer keys in place.
Note
a) The sizes of the synchronizer keys are
different.
86U07A-067
Specification:
1 st/2nd
3rd/4th
5th/Rev.
86U07A-068
© ©
19 (0.7480) 4.25 (0.1673) 4.25 (0.1673)
17 (0.6693) 4.25 (0.1673) 4.25 (0.1673)
86U07A-066
mm (in)
©